Night Vision Waterproof Spy DVR Camera Watch 16GB & 32GB Spy Watch 1280X960

Price BDT: 8500 (16 GB)
Price BDT: 13500 (32 GB)

Hot Spots
Sport and fashionable style, Super-strong Waterproof function
High Definition Camcorder function, Up to 8MP.
Video Resolution: 1280x960
play the Video Directly from the Computer
Punctual timing

Parameters:

Item
Parameters
Video format
AVI
Video encoding
M-JPEG
Video resolution
1280*960VGA
Video frame rate
30fps
Media playing software
Attached software of the operating system or Mainstream audio and video media playing software
Picture format
JPG
Picture pixels
5M Pix
The ratio of image
4:3
Supporting system
Windows me/2000/xp/2003/vistaï¼› Mac O/Sï¼›Linuxï¼›
Battery capacity
200mAh
Working time
About 70 minutes
Charging voltage
DC-5V
Interface type
F2.5 4 Pin USB
Storage support
Nand flash
Battery type
high-capacity lithium polymer

Operating:

A. Parts Description:
Indicator: Status Indicator (7): blue light is the photo taking mode; red light for the video recording mode.
Button(4): Touch the button for the start.
Socket(1): The 2.5 – 4 pin USB socket is used to connect with computer or charger. It is the interface for data transfer and charging.
Microphone and camera: Microphone (2) is used to get the sound signal; (3) is used to get the image signal.
Time setting: It is to set the time of this watch.

B. ON/OFF: Press button (4) for 2 seconds to start the device. It gets into
the photo recording mode. Meanwhile the blue light indicator is on.

C. Take photo: In the photo-taking mode, the device enters into the standby status for photo-taking. Now the blue light is on. Press the button (6) for 1 second. One flashing blue light indicates that the device completes the photo taking and file saving job. Then it returns to the standby mode.

Note: Make sure there is adequate light in the surrounding and the camera is not blocked by other items. Keep the camera upright and stable. And the object should be more than 50cm from the camera.

D. Record video: In the photo mode , long press operation button 2 seconds, the cam into the video mode , this time the red light flashes, in order to save system power and began recording in about 3S bell, the status indicator light will automatically switch off, this time the video is still at the video mode , and if the state recognized the camera, or a new operation, briefly press the operation button once to stop recording, save the file, this time to resume a long bright blue light.

E. Record sound: sart state, a long bright blue light, short the switch machine key (Figure 4), blue light began to blink, in order to save system power and began recording in about 3S bell, the status indicator light will automatically switch off, short the switch machine to save the and enter the camera recording standby mode, this time a long bright blue light.

F. PC camera: Hold down the Operation button (Figure 6), you can connect the device with computer USB interface, you can enter the PC Camera (webcam) mode. In this mode, your camera can be used as a PC camera, with your friends online video chat, take photos, and so on.

Note: According to the computer system configuration or difference, the computer may not detect a camera function by once, if the computer can not enter the camera function, but into a Udisk. Please remove the camera and connect the camera to the computer again; If you are the first time to use the PC camera function on your computer, please install the drivers on the CD or dealers provided. Please connect the data cable to the device at first, then connect the other side to the Computer.

G. Connect the computer: In standby or OFF mode, you can connect the device with the computer. The computer will pop up a removable disk logo. There is an image file directory for: * Disk \ _REC \ 100MEDIA. During video recorder and computer transfer data, the blue light flashes rapidly. For the disconnection, please click ‘SAFELY REMOVE HARDWARE on the right bottom corner of the task bar. Then click to stop the ‘USB mass storage device .Unplug the USB. The disconnection completes.

H. Charge: Connect to computer USB interface or charger. During the charging, the red light flashes slowly. When the battery is fully recharged, the red light stops flashing. Note: The recorder is with built-in high-capacity lithium polymer battery. The battery is with no memory effect. It can be used and charged at anytime. But for the initial five times of charging, please charge battery to saturation after the battery runs out. It is to activate the battery maximum capacity and maintain the standard working time.

I. Set Time: The video recorder provides the function to display the video recording time in video file. The format is as following: Year – month - Day: minutes: seconds. Time setting process is as following:

Create a new file in ".TXT" format. Input the time in accordance with the following format 2008.07.15 16.10.28. The time is the current time at your location. Please double- check the text format in order to ensure the correct format..Rename the new text file as "time.txt".Connect the video recorder to the computer; wait until the computer appears a ‘ REMOVABLE DISK’. Copy the “time.txt" file to this storage device root directory.Disconnect this storage device. Restart the video recorder to complete the time setting. The set time will be saved to the video recorder.

Package Includes:
1 x Waterproof Watch Camera.
1 x Manual.
1 x USB Cable.
1 x Charger.